SUPER48 Heavy Duty Retractable Keychain with Ball-Joint Lock

0S48-803

$ 20.49

Product Description

The SUPER48 Heavy Duty Retractable Keychain was built for rugged use and hard work. The durable black polycarbonate case is impact resistant, and the retractable cord made with DuPont^™ Kevlar^®fiber is guaranteed to outlast any other retractable key holders on the market. Attach your keys or small tools to the oversized split ring and secure the clip to your belt. When you need your keys just pull them out, when your done let them go and the built-in tether retracts back into place, secure the ball-joint lock until you need them again. When you need a heavy duty key holder to secure a large number of keys, the SUPER48 Heavy Duty Retractable Keychain your best choice.

Features and Benefits

Lasts up to 10x longer and protected by a 1-Year warranty
Made in the USA with globally sourced materials.
KEY-BAK ECO-REELS produce 90% less waste than disposable reels, keychains, and tethers
Heavy Duty aramid fiber cord with an 80 lb. minimum breaking strength
2-1/4" diameter black, lightweight, shatter resistant polycarbonate case
Patented ball-joint lock prevents snagging and allows for overloading
Belt clip options fits belts up to 1.8" and locks with the included pin
Leather Loop options fit up to 2.25" duty belts common in law enforcement
Oversized 1.5" black split-ring
Heavy Duty retraction force holds up to 8 oz. and has a 48" reach
Standard Duty retraction force holds up to 13 oz. and has a 36" reach
Xtreme Duty retraction force holds up to 20 oz. and has a 28" reach
Backed by a Lifetime Service Policy

PATENTED BALL-JOINT LOCK

The patented ball-joint lock on the SUPER48 Retractable Heavy Duty Key Holder keeps your keys securely at your side while not in use. Like our other models, the SUPER48 will only retract the amount of weight specified on the retraction force, but the ball-joint will allow you to exceed the retraction force and lock your keys when you're not using them so they don't sag.

KEY-BAK Retractable Reels - Super48 Kevlar Cord

HEAVY DUTY ARAMID FIBER CORD

The SUPER48 features a retractable cord, made with DuPont^™ Kevlar^®fiber. The SUPER48 comes in 3 different retraction forces, a 48" Kevlar Cord with 8 oz. retraction, a 36" Kevlar Cord with 13 oz. retraction and the 28" Kevlar Cord with 20 oz. of retraction.

KEY-BAK Retractable Reels - Super48 Steel Belt Clip

BELT CLIP OR LEATHER LOOP

There are two attachments available with the SUPER48. There is a steel belt clip option that fits belts up to 1.8" and locks into a belt loop with the an included pin. There is also our leather duty belt loop option that fits belts up to 2.25" duty belts most common in law enforcement.

HAND SANITIZER CARRIER

Upgrade your SUPER48 to include the Hand Sanitizer Carrier. Paired with KEY-BAK retractable keychains, the Hand Sanitizer Carrier keeps hand sanitizer secure & accessible at all times and can fit nearly any shaped bottle up to 2 oz.

SHOW ME MORE!

Alternative uses for hand sanitizer carrier

COMMON QUESTIONS

How long does thE SUPER48 KEY HOLDER reach?

The SUPER48 comes in 3 different retraction forces, a 48" Kevlar Cord with 8 oz. retraction, a 36" Kevlar Cord with 13 oz. retraction and the 28" Kevlar Cord with 20 oz. of retraction.

What is the retractable cord ON THE SUPER48 made out of?

The SUPER48 features a heavy duty retractable cord, made with DuPont^™ Kevlar^®fiber and has an 80 lb. minimum breaking strength.

How DO YOU ATTACH KEYS TO THE SUPER48 KEY HOLDER ?

The SUPER48 has a black oversized 1.5" black split-ring

Is the SUPER48 KEY HOLDER made in the USA?

The SUPER48 Heavy Duty Retractable Key Holder is designed and built in the USA with globally sourced materials at our factory in Ontario, CA.

What is the Size of the SUPER48?

The SUPER48 Heavy Duty Key Holder is 2.28" wide and 3.4" from the top of the reel to the top of the split ring, the split ring is 1.25" in diameter. The body of the reel is .7" thick.

WHAT CUSTOMERS ARE SAYING

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

SUPER48 Heavy Duty Retractable Keychain with Ball-Joint Lock

SUPER48 Heavy Duty Retractable Keychain with Belt Clip or Duty Belt Leather Loop and Ball-Joint Key Ring Lock

SUPER48 Heavy Duty Retractable Keychain with Ball-Joint Lock

Longtime Customer

Why did I wait so long. Buy one today!!!

This is an Amazing product!

I need to have alot of keys immediately available to me at my job. This Key-Bac is reliable and sturdy!

It never dies.

I was given one of the Xtreme versions of this by a co-worker, since he'd ordered 3 (thinking that they'd break over time, but his first one never did)... I used that thing continually at work... my employer was lock-crazy... locks on every door, elevator locks, escalator locks... I likely pulled the keys out about 200 times per day, being on the watch.

The locking knob broke due to the stress of three heavy keyrings (more than 30 keys) constantly swinging as I walked more than 20 miles per day, so I cut it off the cord very carefully with a Dremel because it was abrading the cord each time I pulled the keys out. The bottom part of the plastic part that holds the key ring got crushed and cracked during some heavy work... I cut it off the cord, tied the cord around a small washer, dabbed some superglue on the knot so it couldn't come undone, put the key rings through the washer, and it worked as good as new. 10 years of use and it's still usable. I'll use it until the cord snaps (then I'll install a new cord) or until the spring snaps (then I'll install a new spring).

Seamless transition of power

Exact replacement for the one I'd had since 2018. Thumbs up.

Simply Awesome!!

Product is as advertised and then some. I actually think I may have over ordered as it is handling the purpose purchased for well and above what is currently required.

Super 48

So far so good 👍

Amazing product

I am going to be getting more

Fantastic So Far

I bought a SUPER48 after burning through three "heavy-duty" key zips in about a year. It handles daily use really well, and it feels well-made.

Long lasting

Smooth and reliable. The best retractable key chain I've had

1 2 3

KEY-BAK Original Series Retractable Keychain in Vintage Chrome or Vinyl Black

0005-011

$ 17.99

Product Description

The key retractor that got KEY-BAK started in 1948, the Original Series retractable key chain is a heavy duty key reel that is guaranteed to outlast the competition. The Original Series retractable key chain is popular because of its vintage look and the flexibility of customizing the reel to your specifications. Choose either the retractable 24" vintage steel chain or the retractable cord made with DuPont^™ Kevlar^®fiber. Next, choose between a classic cold-rolled steel chrome plated front or a more inconspicuous black vinyl cover. Lastly, choose how you'd like to secure the key reel to your side, with either a stationary steel belt clip, a steel belt loop, removable rotating belt clip or a leather duty belt loop. Although it is often copied, there has still never been another retractable key reel that matches the quality, durability or versatility of the Original KEY-BAK Retractable Key Chain.

Features and Benefits

Lasts up to 10x longer and protected by a 1-Year warranty
Made in the USA with globally sourced materials.
Produce 90% less waste than disposable reels, keychains, and tethers
Stainless Steel Spring is housed in a 2" durable stainless steel case
1.25" Zinc-plated, spring-tempered steel, corrosion resistant split ring
Available with steel belt clip, steel belt loop, rotating belt clip or leather duty belt loop
Backed by a Lifetime Service Policy

Retraction forces

Standard Duty Stainless Chain retraction force holds up to 6 oz. and has a 24" reach
Heavy Duty Cord retraction force holds up to 8 oz. and has a 48" reach
Super Duty Cord retraction force holds up to 13 oz. and has a 36" reach
Xtreme Duty Cord retraction force holds up to 20 oz. and has a 28" reach

CHROME or black FINISH

The KEY-BAK Original Series retractable key chain comes in two colors. Choose between a classic cold-rolled steel chrome plated front or a more inconspicuous black vinyl cover.

DuPont^™ Kevlar^®fiber CORD

Our heavy duty, super duty and xtreme duty Original Series reels come in 48", 36" or 28" lengths respectively and have a retractable cord made with DuPont^™ Kevlar^®fiber which has an 80 lb. minimum breaking strength.

STAINLESS steel chain

The retractable 24" vintage steel chain option on the Original Series retractable key chain hasn't changed in over 70 years and every link is still made on the same machines.

STEEL BELT CLIP OR BELT LOOP

The Original Series retractable key holder has two stainless steel attachment options. The stainless steel belt clip is 2" long and easily clips onto most belts. The stainless steel belt loop option allows belts 1.75" wide and up to 3/16" thick to fit through the loop to secure the reel to your hip.

REMOVABLE ROTATING BELT CLIP

The removable rotating belt clip on the Original Series retractable key chain is a two piece clip that allows you to remove the retractable key reel without taking the clip off your side. Simply give the reel a quarter turn in either direction and lift up, the reel will lift off while leaving the clip securely at your side.

DUTY BELT LEATHER LOOP

The leather loop attachment option on the Original series retractable key reel is specifically designed to accommodate 2 1/4" Duty Belts commonly used in Law Enforcement and Security. The leather loop option is only available with a vinyl black front.

COMMON QUESTIONS

How long does thE ORIGINAL SERIES reach?

The Original Series Retractable Key Holder has 4 different retractable cord lengths available. The stainless steel chain has a 24" reach and can hold up to 6 oz., the Heavy Duty option has a 48" reach and can hold up to 8 oz., the Standard Duty option has a 36" reach and can hold up to 13 oz. and the Xtreme Duty option has a 28" reach and can hold up to 20 oz.

What is the retractable cord ON THE ORIGINAL made out of?

The Original Series Retractable Key Holder has two different retractable cord materials, the 24" vintage steel chain or the retractable cord made with DuPont^™ Kevlar^®fiber

How DO YOU ATTACH KEYS TO THE ORIGINAL SERIES ?

Each of our Original Series Retractable Key Holders include a 1.25" Zinc-plated, spring-tempered steel, corrosion resistant split ring.

Is the ORIGINAL SERIES made in the USA?

Original Series Retractable Key Holder is designed and made in the USA with globally sourced materials
at our factory in Ontario, CA.

What is the total length of the ORIGINAL SERIES?

The Original Series is 3.75 inches in length from the top of the reel to the bottom of the split ring. The body of the Original Series is 2" in diameter and thickness varies depending on the attachment chosen.

WHAT CUSTOMERS ARE SAYING

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

KEY-BAK Original Series Retractable Keychain in Vintage Chrome or Vinyl Black

The Original Retractable Keychain with Vintage Chrome or Vinyl Black Front and Key Ring

KEY-BAK Original Series Retractable Keychain in Vintage Chrome or Vinyl Black

Does the Job

I've found that the chain/Kevlar thread tends to last 2-3 years then needs replacing. Key-Bak has been good about replacing the key-chain when this happens at no charge. I ordered the black and they sent me the chrome version. Not a big deal.With all the keys I use daily, I don't know how I'd survive without the Key-Bak.

KEY-BAK Original Series Retractable Keychain in Vintage Chrome or Vinyl Black

I'm

Well done

Excellent

R

KEY-BAK Original Series Retractable Keychain in Vintage Chrome or Vinyl Black

removable clip

it sucks, lost keys twice
comes off when i sit

Very impressed

It is true that some things only get better with time and the longevity of the KEY-BAK is no different. Love the product.

Very Satisfied

These retractable keychains have become part of the uniform for our employees. We all are very satisfied with the quality of them.

1 2 3

KEY-BAK SECURIT Heavy Duty Retractable Carabiner Keychain

0008-003

$ 20.99

The SECURIT Heavy Duty Carabiner Retractable Keychain conveniently attaches to almost anything, making this one of the most widely used retractable keychains on the market. Built in the USA with globally sourced materials, the SECURIT has a strong molded black polycarbonate case and a retractable cord made with DuPont^™ Kevlar^® fiber. Attach your keys or small tools to the zinc plated split ring and secure the carabiner to your belt clip, work belt or backpack. When you need your keys just pull them out, when you're done let them go and the built-in tether retracts back into place until you need them again. When you need a versatile retractable reel the SECURIT Heavy Duty Carabiner Keychain is your best option.

Features and Benefits

Made in the USA with globally sourced materials and proven to last more than 1-million pulls
Heavy Duty aramid fiber cord with an 80 lb. minimum breaking strength
Protected by a 1-Year Limited Warranty and Lifetime Service Policy
Stainless Steel Spring in a 2" diameter durable polycarbonate housing
7" length from top of carabiner to bottom of split ring
Zinc alloy carabiner conveniently clips onto belt loops, bags or purses

Retraction Forces Available

Standard Duty Stainless Steel Chain retraction force holds up to 6 oz. and has a 24" reach
Heavy Duty Cord retraction force holds up to 8 oz. and has a 48" reach
Super Duty Cord retraction force holds up to 13 oz. and has a 36" reach
Xtreme Duty Cord retraction force holds up to 20 oz. and has a 28" reach

Add Your Logo

Promote your brand with Custom Logo Printing. Retractable Keychains are great for giveaways, employee motivation or wherever a logo, slogan or insignia will get your organization noticed. Click here to see our selection of custom printable products.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

KEY-BAK SECURIT Heavy Duty Retractable Carabiner Keychain

SECURIT Heavy Duty Retractable Keychain with Carabiner Attachment and Key Ring

Works great

It’s seen Hell and back!

After 5 grueling years working daily, countless times being washed in the laundry My Keybak finally broke, just goes to show you how long these last! Definitely worth the money! It still works fine I just can’t clip it to my uniform anymore..

Excellent product.

Mine has more than 5 years and still doing its job. Totally recommended!

Long life, superior performance

Having had one of the original standard duty units for over 10 years it’s proved itself time and time again, even to the extent of stopping me in my tacks when I accidentally got my keys caught. It’s finally broken so I’ve bought a new one.

Best Key-Bak you guys make! Supports a lot of keys and takes years to finally wear out.

KEY-BAK SECURIT Heavy Duty Retractable Carabiner Keychain

Great so far….

This is my second one that I’ve purchased. The last one the plastic holder somehow got cut by the cord I’m assuming by it going in and out Frequently. I had it for a year and a half and it broke so I got another one because I like the product I just hope this one last longer.

Broke

After a few months use, the cord snapped from the plastic part. I had to tie it. I have limited amount of reeling length now :(

KEY-BAK SECURIT Heavy Duty Retractable Carabiner Keychain

1 2 3

SIDEKICK® Twist-Free Carabiner Retractable Keychain and Badge Reel That Holds Up to 5 Keys and ID Badge

0KB1-0A21

$ 13.99

Product Description

The Sidekick Retractable Keychain & Badge Reel is small but mighty and capable of holding up to 5 keys and a badge, making the Sidekick one of the top selling retractable badge reels among working professionals. Built in the USA with globally sourced materials, the Sidekick has a strong molded black polycarbonate case and a retractable cord made with DuPont^™ Kevlar^®fiber. Attach your keys and badge to the twist-free end fitting and secure the carabiner to your belt clip, work vest or backpack. When you need your keys just pull them out, when your done let them go and the built-in tether retracts back into place until you need them again. When you're looking for an all-in-one everyday carry companion to secure your keys and badge the Sidekick is your best option.

Features and Benefits

Lasts up to 10x longer and protected by a 1-Year warranty
Made in the USA with globally sourced materials.
KEY-BAK ECO-REELS produce 90% less waste than disposable reels, keychains, and tethers
Standard Duty retraction force holds up to 4 oz. and has a 24" reach
Heavy Duty aramid fiber cord with an 80 lb. minimum breaking strength
Twist-Free end fitting with split ring secures keys and an I.D. Badge
Zinc alloy carabiner conveniently clips onto belt loops, bags or purses
Stainless Steel Spring in a 1-3/8” diameter black polycarbonate case
Backed by a Lifetime Service Policy

Twist-free end fitting

The Sidekick's polycarbonate twist-free end fitting keeps your I.D. badge from flipping so it's always forward facing and easily identifiable.

HAND SANITIZER CARRIER

Upgrade your Sidekick to include the Hand Sanitizer Carrier. Paired with KEY-BAK retractable keychains, the Hand Sanitizer Carrier keeps hand sanitizer secure & accessible at all times and can fit nearly any shaped bottle up to 2 oz.

KEYS & BADGE companion

The Sidekick can hold up to 5 keys and a badge, making it the perfect everyday carry companion for working professionals.

COMMON QUESTIONS

How long does thE SIDEKICK reach?

The Sidekicks' retractable cord has a 24" inch reach when fully extended.

What is the retractable cord ON THE SIDEKICK made out of?

The Sidekick's heavy duty retractable cord is made with DuPont^™ Kevlar^®fiber and has an 80 lb. minimum breaking strength.

How do you attach the badges to the sidekick?

The Sidekick has a Split Ring and Vinyl I.D. Badge Strap. The vinyl i.d. badge fits through an opening commonly found at the top of most i.d. badges snaps closed to secure the badge to the reel. If your i.d. badge does not have an opening to put the vinyl i.d. badge strap through you'll need to use an i.d. badge sleeve to secure your badge to the Sidekick reel.

Is the sidekick made in the USA?

The Sidekick is designed and built with globally sourced materials at our factory in Ontario, CA.

What is the total length of the sidekick?

The Sidekick is 5 inches in length from the top of the carabiner to the bottom of the vinyl i.d. badge strap. The body of the Sidekick is 1-3/8 inches wide and 1/2 inch thick.

WHAT CUSTOMERS ARE SAYING

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

SIDEKICK® Twist-Free Carabiner Retractable Keychain and Badge Reel That Holds Up to 5 Keys and ID Badge

Sidekick Retractable Keychain & Badge Reel with Carabiner, Key Ring and Twist-Free Clear Vinyl I.D. Strap

SIDEKICK® Twist-Free Carabiner Retractable Keychain and Badge Reel That Holds Up to 5 Keys and ID Badge

They're so great, we had to come back for more!

I have bought retractable lanyards before and they didn't hold up.... but when I found this company, and explained the problems we were having with ours, they recommended these. Huge difference! Never a single problem with any of them now! When we ended up hiring more staff, we didn't bother running to the big box store... we contacted this company once again and ordered more!

Very durable

I bought the SIDEKICK® TWIST-FREE CARABINER RETRACTABLE KEYCHAIN on Amazon, which made it easy to verify how long it's been in service. Yesterday while heading to my barn it finally failed. The Kevlar line detached at the keys end. It lasted one week shy of SIX YEARS PLUS ONE MONTH! I used it nearly everyday. New one arrives tomorrow but the local locksmith told me that this retractable keychain may have a lifetime warranty so I'll be looking into that. OVER 6 years and around $10.

wonderful and durable

To be fair, I've only this about a month or so, but so far, it's holding up quite well.

Love it! Wish it lasted longer

As an ER Trauma nurse, I need a badge buddy that can keep up. The SIDEKICK is able to hold multiple badge buddies and keys without drooping. Completely satisfied, but the housing broke in half 2 months after the warranty expired. 4 stars as I wish it lasted longer.

Its ok

It does what its intended to but the tether cord is already wearing out and its not like im using it all day and pulling on it all the time. Kind of disappointed in the quality

Pretty Great

It's nice to have my badge and work key at hand without having to dig through my pockets. Build quality is top notch too. This isn't some cheap crap you get as a freebie from work.

99.9% Awesome

I received a Key-Bak years ago and the clip broke. I finally remembered the name and ordered more. I use it for my scan cards, so I am use it daily. Still love the durability & design. My one small issue is the spring on the clip, it might break again, but I ordered plenty. Other than that awesome product, I like it very much and recommend it to co-workers!

Zip Zip Zip All Night Long

I am a trainer at a very busy steakhouse. I purchased this about a month or so ago and so far so good! It has starting to make this clicking noise when I pull it out but when I checked the string everything seems fine. Here's the real truth though... You have absolutely no idea how much this is pulled in and out, smashed up against walls, chairs, tables and anything else that gets in its way. I definitely don't expect it to last forever and in fact I'm very surprised it's lasted this long!! Anything I've used in the past explodes within 2 to 3 weeks max. I had high hopes this would be a quality product, one that would stand up to the insane abuse I planned on putting it thru and like I said... So far so good!
Under normal use I see this product lasting a very very long time. This is a quality product and I will be ordering a backup or 2 soon and will be recommending this to all new server's.

Best Key Reel For My Needs

You can feel the quality as soon as you remove from packaging. The reel cable, reel tension and the rest are first rate. This is my 3rd Key-Bak purchase. There will be more in the future.

1 2 3

MINI-BAK® Retractable Badge Holder

0055-005

$ 8.49

Product Description

In 1981, KEY-BAK invented the first Retractable Badge Holder, the MINI-BAK^®, and it is still one of the best badge reels on the market today. Built in the USA with globally sourced materials, the Mini-Bak badge reel has a strong molded black polycarbonate case and a retractable cord made three-strand braid nylon. Attach your i.d. badge or access cards to the vinyl badge holder and secure the retractable badge holder to your belt, work vest or scrubs. When you need your badge just pull it out, when your done let it go and the built-in tether retracts back into place until you need them again. When you need a reliable badge reel for a badge or two the Mini-Bak Badge Reel is your most durable option.

Features and Benefits

Lasts up to 10x longer and protected by a 1-Year warranty
Made in the USA with globally sourced materials.
KEY-BAK ECO-REELS produce 90% less waste than disposable reels, keychains, and tethers
36" retractable military grade type-II braided nylon fiber cord
Available with belt clip or swivel clip attachment
Stainless Steel Spring in a 1-1/4” diameter black polycarbonate case
Standard Duty retraction force holds up to 2 oz. and has a 36" reach
Backed by a Lifetime Service Policy

STEEL BELT CLIP

The belt clip on the MINI-BAK Retractable Badge Reel is a convenient attachment option for securing the badge reel at your hip on a belt or on your scrubs. It is made of a durable stainless steel that measures 1.25" long and is heat treated for added durability and resistance from bending out of shape.

SWIVEL BULLDOG CLIP

The swivel bulldog clip on the MINI-BAK Retractable Badge Holder is a spring loaded clip that opens with a pinch and can rotate 360 degrees. This clip is a popular option because it allows you to secure your badge in visible locations such as shirt pockets, on a shirts v-neck or the pocket of your pants.

BRAIDED NYLON CORD

The retractable cord on the MINI-BAK Retractable Badge Holder is made out of military grade type-II braided nylon fiber cord and has been tested to last more than 1-million pulls.

COMMON QUESTIONS

How long does thE MINI-BAK BADGE REEL reach?

The MINI-BAK Retractable Badge Holder holds up to 2 oz. and has a 36" reach.

What is the retractable cord ON THE MINI-BAK BADGE REEL made out of?

The retractable cord on the MINI-BAK Retractable Badge Holder is made out of retractable military grade type-II braided nylon fiber cord.

How DO YOU ATTACH BADGES TO THE MINI-BAK BADGE REEL ?

The MINI-BAK Badge Reel has a Vinyl I.D. Badge Strap. The vinyl i.d. badge fits through an opening commonly found at the top of most i.d. badges snaps closed to secure the badge to the reel. If your i.d. badge does not have an opening to put the vinyl i.d. badge strap through you'll need to use an i.d. badge sleeve to secure your badge to the MINI-BAK Badge Reel.

Is the MINI-BAK BADGE REEL made in the USA?

The MINI-BAK Retractable Badge Holder is designed and made in the USA with globally sourced materials at our factory in Ontario, CA.

What is the total length of the MINI-BAK BADGE REEL?

The MINI-BAK is 3.5 inches in length from the top of the reel to the bottom of the vinyl i.d. badge strap. The body of the MINI-BAK is 1.25 inches in diameter and thickness varies depending on the attachment chosen.

WHAT CUSTOMERS ARE SAYING

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

MINI-BAK Badge Reel with a Clip-on or Belt Clip Attachment and Clear I.D. Badge Holder

Nice product

Works very well and is compact. Wonderful that it’s made in the USA which is the main reason for its purchase.

Update: Key-Bak Contacted Me

A representative called me and resolved my issue.

Great product!

It's a great product and did what was expected, however, we misjudged the weight of the multiple cards cards and badges we wanted to use it for and it did not retract all the way. Definitely not a product issue! We will probably order a more heavy duty one when we know how many badges/IDs will actually have to be carried.

A million pulls

Pull it out. It goes right back in. Out and back in. It goes in and then when you need to use it it pulls out and back in. Each and every single time. Out then in.

MINI-BAK® Retractable Badge Holder

Exactly what I wanted and expected...perfect

Good quality product

Great buy, will buy again in the future.

Perfect every time

Exactly what I wanted.

Great quality

Such a small thing, but so important to my daily life. I have bought countless of these in my career, and time and again they last a few months and then break. I could tell on the first pull this one is gonna last longer than a minute!

Awesome Product! Made in USA!

Hello,

I ordered these badge reels for my girlfriend who is a nurse. They are very high quality and I'm sure they will last for years. I ordered them specifically because they were made in the USA! As an American factory worker I want to thank you for keeping things like these made in this country! The Wuhan Coronavirus has definitely pulled back the curtain and shown just how much out manufacturing capability has been gutted out in the last 40 years and how dependent we are on foreign entities. So thank you again for continuing to make great products in this great country! My girlfriend who uses these badge reels everyday loves them!

James
USA

Mini-Bak Badge Reel

its ok. the kelvar string seems a little weak. Im only saying this because I had 2 kelvar key ring re-tractors with heavier strings and they both broke

1 2

MID6 Heavy Duty 6 oz. Badge Reel with Belt Clip or Carabiner

0006-015

$ 16.49

Product Description

The MID6 Heavy Duty Badge Reel conveniently is great for people who carry multiple badges and access them frequently, making this one of the most widely used retractable badge holders on the market. Built in the USA with globally sourced materials, the MID6 Badge Reel has a strong molded black polycarbonate case and a retractable cord made with DuPont^™ Kevlar^®fiber. Attach your i.d. badge or access cards to the vinyl badge holder and secure the carabiner or clip to your belt loop, work belt or backpack. When you need your badge just pull it out, when your done let it go and the built-in tether retracts back into place until you need them again. When you a heavy duty badge reel that works as hard as you do the MID6 is your most durable option.

Features and Benefits

Lasts up to 10x longer and protected by a 1-Year warranty
Made in the USA with globally sourced materials.
KEY-BAK ECO-REELS produce 90% less waste than disposable reels, keychains, and tethers
Standard Duty retraction force holds up to 6 oz. and has a 36" reach
Heavy Duty aramid fiber cord with an 80 lb. minimum breaking strength
Stainless Steel Spring in a 1.75" diameter durable polycarbonate housing
Available with zinc alloy carabiner or steel belt clip
Backed by a Lifetime Service Policy

Swivel STEEL BELT CLIP

The belt clip option on the MID6 Retractable Badge Reel is a convenient attachment option for securing the badge reel at your hip. It is made of a durable steel that is color coated with a black oxide. The clip measures 1.5" long and is heat treated for added durability and resistance from bending out of shape.

HAND SANITIZER CARRIER

Upgrade your MID6ID or MID6CID to include the Hand Sanitizer Carrier. Paired with KEY-BAK retractable keychains, the Hand Sanitizer Carrier keeps hand sanitizer secure & accessible at all times and can fit nearly any shaped bottle up to 2 oz.

DUPONT^™ KEVLAR^®FIBER CORD

The cord on the MID6 Retractable Badge reels is a heavy duty DuPont^™ Kevlar^®fiber. The MID6 has a standard duty retraction force which holds up to 6 oz. and has a 36" reach.

COMMON QUESTIONS

How long does thE MID6 Badge Reel reach?

The MID6 has a standard duty retraction force which holds up to 6 oz. and has a 36" reach.

What is the retractable cord ON THE MID6 made out of?

The retractable cord on the MID6 Retractable Badge reels is a heavy duty DuPont^™ Kevlar^®fiber cord and has an 80 lb. minimum breaking strength.

How DO YOU ATTACH BADGES TO THE MID6 SERIES ?

The vinyl i.d. badge strap fits through an opening commonly found at the top of most i.d. badges snaps closed to secure the badge to the reel. If your i.d. badge does not have an opening to put the vinyl i.d. badge strap through you'll need to use an i.d. badge sleeve to secure your badge to the MID6 reel.

Is the MID6 made in the USA?

The MID6 Retractable Badge Holder is designed and built with globally sourced materials at our factory in Ontario, CA.

What is the total length of the MID6 BADGE REEL?

The MID6 Badge Reel with Belt Clip is 4 inches in length from the top of the reel to the bottom of the vinyl i.d. badge strap. The MID6 Badge Reel with the Zinc Alloy Carabiner attachment is 8 inches from the top of the carabiner to the bottom of the vinyl i.d. badge strap.

WHAT CUSTOMERS ARE SAYING

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

MID6 Heavy Duty 6 oz. Badge Reel with Belt Clip or Carabiner

MID6 Heavy Duty Badge Reel with Swivel Belt Clip or Carabiner Reel and Clear I.D. Badge Holder

Always Access to My Room

The Badge Reel with Carabiner offers security that my room key card is always with me. Have used it for 24 days and it works like a charm. Love it!

MID6 Heavy Duty 6 oz. Badge Reel with Belt Clip or Carabiner

Great product

Until now it's been the best product I've bought, it's very strong, it has survived unexpected harsh pulls and hits. The only issue and the only reason I don't give 5 stars is that is pretty big and long, so it hangs way too much, and if you're walking fast or running it's jumping all over the place, maybe the belt clip was a better option for me.

Works well enough

I bought this item to have a sturdier carabiner for my work badge. It is sturdy and does not seem like it will break any time soon. The reel has a lot of tension compared to other carbiners, which I don't really like. And it is longer than I expected - the length causes your badge to swing quite a bit. It will hit walls or anything you are close to regularly. It does the job, but I'm not completely satisfied with it.

So far I love it

Works great hasn’t broke yet so that’s a plus

MID6 Heavy Duty 6 oz. Badge Reel with Belt Clip or Carabiner

Great Product, a little big

Very solid design, it was bigger than I expected. It would be nice to have a coin or a person's hand in the picture for scale.

Great product and fast shipping

The best

A+

Nice heavy duty reel

Badge reel is exceptional. Only improvement would be the plastic tab that holds the badge. Recoil strength is great!

1 2

SIDEKICK® Twist-Free Breakaway Lanyard Badge Holder and Retractable Keychain That Holds Up to 5 Keys and ID Badge

0KB1-0A41

$ 21.49

The SIDEKICK® Retractable Key Chain & Badge Lanyard is great when you need to wear your badge around your neck, but don't want to take it off every time you need to scan it or unlock a door. The Sidekick lanyard is a breakaway lanyard with badge reel and key chain capable of holding up to 6 keys and a badge, which makes it a popular choice for office professionals. It features a safety breakaway lanyard, spring loaded cinch and a USA made retractable tether with DuPont^™ Kevlar^®fiber. Attach your keys and badge to the twist-free end fitting and secure the lanyard badge holder around your neck. When you need use your badge just pull it out, when your done let it go and the built-in tether retracts back into place until you need it again. When you need the visibility of a breakaway lanyard, but the convenience of a retractable key chain and badge holder, the Sidekick lanyard badge reel and key chain is the perfect solution.

Features and Benefits

Standard Duty retraction force holds up to 4 oz. and has a 24" reach
Built in the USA with globally sourced materials and proven to last more than 1-million pulls
Heavy Duty aramid fiber cord with an 80 lb. minimum breaking strength
Protected by a 1-Year Limited Warranty and Lifetime Service Policy
Twist-Free end fitting with split ring secures keys and an I.D. Badge
Strong Paracord breakaway lanyard with spring loaded cinch
Stainless Steel Spring in a 1-3/8” diameter black polycarbonate case

Add Your Logo

Promote your brand with Custom Logo Printing. Retractable Key Chains are great for giveaways, employee motivation or wherever a logo, slogan or insignia will get your organization noticed. Click here to see our selection of custom printable products.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

SIDEKICK® Twist-Free Breakaway Lanyard Badge Holder and Retractable Keychain That Holds Up to 5 Keys and ID Badge

Very Sturdy (Except for Vinyl Badge Holder)

Overall, I am pleased with this sturdy badge holder. After almost one year of use, the lanyard and retractable badge reel have held up to dozens of pulls each day, with no sign of wear or fatigue. However, the snap on the vinyl badge holder failed after just two months of use. I tried to hold the snap together with some electrical tape, but that eventually failed as well. So, I moved my badges to the split ring instead.

Sub-par

The cords keep pulling out of the break-away lugs rendering these very non-secure. Would NOT recommend.

We're sorry to hear that yo did not have a great experience. We take the feedback from our customers very seriously because it ultimately helps other shoppers make the best decision when purchasing a product. Unfortunately, we were not able to find any purchase history. Did you make the purchase through our website?

Very satisfied

Works as expected

Great Product!

Shipping was fast, and product was perfect. Many thanks.

Perfect

met and exceeded my expectations

SIDEKICK® 4 oz. Twist-Free Retractable Badge and Key Lanyard

Great badge holder/lanyard. Just what the doctor ordered.

SIDEKICK 4 oz. Twist-Free Retractable Badge and Key Lanyard

This is an amazing product. Far superior from anything I have purchased anywhere else.

MID6-Duo Heavy Duty Badge Reel and Keychain with Belt Clip or Carabiner That Holds 10 Keys

0006-0824

$ 18.99

Product Description

The MID6-Duo heavy duty badge holder and keychain is great for people who carry multiple badges and keys while accessing them frequently, making this one of the most widely used retractable badge holders on the market. Built in the USA with globally sourced materials, our badge reel and keychain combo has a strong molded black polycarbonate case and a retractable cord made with DuPont^™ Kevlar^®fiber. Attach your i.d. badge or access cards to the vinyl badge holder and secure the carabiner or clip to your belt loop, work belt or backpack. When you need your badge or keys just pull them out, when your done let it go and the built-in tether retracts back into place until you need them again.

Features and Benefits

Holds up to 10 keys, access cards, or badges
Lasts up to 10x longer and protected by a 1-Year warranty
Made in the USA with globally sourced materials.
KEY-BAK ECO-REELS produce 90% less waste than disposable reels, keychains, and tethers
Standard Duty retraction force holds up to 6 oz. weight and has a 36" reach
Built with a aramid fiber cord with an 80 lb. minimum breaking strength
Stainless Steel Spring in a 1.75" diameter durable polycarbonate housing
Available with zinc alloy carabiner or steel belt clip
Backed by a Lifetime Service Policy

SWIVEL STEEL BELT CLIP

The belt clip option on the MID6-Duo Retractable Badge Reel is a convenient attachment option for securing the badge reel at your hip. It is made of a durable steel that is color coated with a black oxide. The clip measures 1.5" long and is heat treated for added durability and resistance from bending out of shape.

The "Best of both Worlds"

Carry keys, mementos, and badges? Upgrade your MID6ID or MID6CID to our MID6-Duo. Now you can carry both your keys and badges together at the same time!

DUPONT™ KEVLAR® FIBER CORD

The cord on the MID6 Retractable Badge reels is a heavy duty DuPont^™ Kevlar^®fiber. The MID6 has a standard duty retraction force which holds up to 6 oz. and has a 36" reach.

COMMON QUESTIONS

How long does thE MID6-DUO BADGE HOLDER AND KEYCHAIN reach?

The MID6-Duo has a standard duty retraction force which holds up to 6 oz. and has a 36" reach.

What is the retractable cord ON THE MID6-DUO made out of?

The retractable cord on the MID6-Duo Retractable Badge reels is a heavy duty DuPont™ Kevlar® fiber cord and has an 80 lb. minimum breaking strength.

How DO YOU ATTACH bADGES TO THE MID6-DUO BADGE REEL?

The vinyl i.d. badge strap fits through an opening commonly found at the top of most i.d. badges snaps closed to secure the badge to the reel. If your i.d. badge does not have an opening to put the vinyl i.d. badge strap through you'll need to use an i.d. badge sleeve to secure your badge to the MID6-Duo reel.

HOW DO YOU ATTACH KEYS TO THE MID6-DUO KEYCHAIN?

Attach the keys by threading the top of key hole onto the split ring.

Is the MID6-DUO KEY HOLDER made in the USA?

The MID6-Duo Retractable Badge Holder and Keychain is designed and built with globally sourced materials at our factory in Ontario, CA.

What is the Size of the MID6-DUO?

The MID6-Duo Badge Reel with Belt Clip is 4 inches in length from the top of the reel to the bottom of the vinyl i.d. badge strap. The MID6-Duo Badge Reel with the Zinc Alloy Carabiner attachment is 8 inches from the top of the carabiner to the bottom of the vinyl i.d. badge strap.

WHAT CUSTOMERS ARE SAYING

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

MID6-Duo Heavy Duty Badge Reel and Keychain with Belt Clip or Carabiner That Holds 10 Keys

The Carabiner could be a little better quality and the badge hangs a little low. Otherwise happy with it.

Great for post office

Works great!

Slightly bigger then I expected but got used to it and love it for its sturdiness!

1 lb. Retractable Tool Tether

0KB6-3FAA2

$ 27.49

Prevent Harm to those below you with the ToolMate 1 lb. Rewinding Tool Lanyard and “STOP THE DROPS”. Designed for Dropped Object Prevention confidently tether tools up to 1 lbs. to you, your harness, ladder, lift or the structure so an accidental dropped tool doesn’t injure a friend, coworker or teammate.

Features and Benefits

Minimized Work Impact – With only 12 oz. of retraction force ToolMate Retractable Tool Lanyards retract only the lanyard, not the tool, providing just the right amount of retraction force to rewind the tool laRewinding Tool Lanyard without pulling on the tool while in use.
Anti-Snagging Design – The self-retracting lanyard keeps the 42” stainless steel cable tool lanyard stays as short as you need it preventing entanglements and snagging on the work space, solving the problem faced by non-retracting tool lanyards
Made to Last – Body made of impact resistant polycarbonate with a stainless steel spring and is designed to last in almost any work environment
Anchor Carabiner – Aluminum swivel carabiner with auto-locking gate prevents accidental gate opening and removal
3rd Party Proven - 3rd party testing guarantees your ToolMate is designed, tested and proven to a 2:1 safety factor

Specifications

Maximum Tool Weight: 1 lb. (.45kg)
Retraction Force: 12 oz. (Does not retract 1lb.)
Overall Reach: 42” (1.0668m)
Tool Lanyard Material: Stainless Steel with polymer Jacket
Tool Attachment: Aluminum swivel carabiner with auto-locking gate or split ring end fitting
Anchor Attachment: Aluminum swivel carabiner with auto-locking gate
Strap: Woven Polyester
ANSI/ISEA 121-2018 Certified

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

1 lb. Retractable Tool Lanyard for Dropped Object Prevention

Good not Great

Would like a different connection for my belt. I clued a Nite Ize clip on it to bring it up even with my belt.

Awesomeness to the max.

I love this tool tether. It works perfectly for what I use it for. Tough dependable and light.

Great service

Great serviceThe product performed as advertised very satisfied

MINI-BAK® Retractable Badge Holder with Lanyard

0AC4-01A4

$ 14.49

Product Description

In 1981, KEY-BAK invented the first Retractable Badge Holder, the MINI-BAK^®, and it is still one of the best badge reels on the market today. Built in the USA with globally sourced materials, the Mini-Bak badge reel has a strong molded black polycarbonate case and a retractable cord made three-strand braid nylon. Attach your i.d. badge or access cards to the vinyl badge holder and secure the retractable badge holder to your belt, work vest or scrubs. When you need your badge just pull it out, when your done let it go and the built-in tether retracts back into place until you need them again. When you need a reliable badge reel for a badge or two the Mini-Bak Badge Reel is your most durable option.

Features and Benefits

Lasts up to 10x longer and protected by a 1-Year warranty
Made in the USA with globally sourced materials.
KEY-BAK ECO-REELS produce 90% less waste than disposable reels, keychains, and tethers
36" retractable military grade type-II braided nylon fiber cord
Available with belt clip or swivel clip attachment
Stainless Steel Spring in a 1-1/4” diameter black polycarbonate case
Standard Duty retraction force holds up to 2 oz. and has a 36" reach
Backed by a Lifetime Service Policy

PROVEN

Tired of fumbling around looking for your lost badge instead of spending your time on what matters most? Our dependable retractable badge holders are backed by our lifetime service policy not to mention that they will last up to 20 times longer than other retractors - we guarantee our products to last MORE THAN 1,000,000 pulls!

CONTROL ACCESS

Reduce the risk of losing, dropping, or getting your ID stolen and allowing unauthorized access to thieves and hackers to your company's assets.

BRAIDED NYLON CORD

The retractable cord on the MINI-BAK Retractable Badge Holder is made out of military grade type-II braided nylon fiber cord.

COMMON QUESTIONS

HOW LONG DOES THE MINI-BAK BADGE REEL REACH?

The MINI-BAK Retractable Badge Holder holds up to 2 oz. and has a 36" reach.

WHAT IS THE RETRACTABLE CORD ON THE MINI-BAK BADGE REEL MADE OUT OF?

The retractable cord on the MINI-BAK Retractable Badge Holder is made out of retractable military grade type-II braided nylon fiber cord.

HOW DO YOU ATTACH BADGES TO THE MINI-BAK BADGE REEL ?

The MINI-BAK Badge Reel has a Vinyl I.D. Badge Strap. The vinyl i.d. badge fits through an opening commonly found at the top of most i.d. badges snaps closed to secure the badge to the reel. If your i.d. badge does not have an opening to put the vinyl i.d. badge strap through you'll need to use an i.d. badge sleeve to secure your badge to the MINI-BAK Badge Reel.

IS THE MINI-BAK BADGE REEL MADE IN THE USA?

The MINI-BAK Retractable Badge Holder is designed and made in the USA with globally sourced materials at our factory in Ontario, CA.

WHAT IS THE TOTAL LENGTH OF THE MINI-BAK BADGE REEL?

The MINI-BAK is 3.5 inches in length from the top of the reel to the bottom of the vinyl i.d. badge strap. The body of the MINI-BAK is 1.25 inches in diameter and thickness varies depending on the attachment chosen.

WHAT CUSTOMERS ARE SAYING

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

MINI-BAK® Retractable Badge Holder with Lanyard

Retractable Badge Holder with Large Badge Strap and Secure Fastener

0067-006-H

$ 10.99

Our Whole Work Lives Are on That Loop!

Name: SUPER48 Heavy Duty Retractable Keychain with Ball-Joint Lock
Brand: KEY-BAK Retractable Reels
SKU: 0S48-803
Price: 20.49 USD
Availability: InStock

Product Description

KEEP YOUR ID BADGE & ACCESS CARD SECURE AT ALL TIMES

Tired of cheap plastic ID badge straps and badge holders that break only after a few uses? Yes, we know the problem and frustration and we've decided to do something about it.

Time after time we've heard our nurses, doctors, and other professionals cry out for help to protect what matters most.

That's why we created the ID badge holder that is big enough to carry your badges, card key fob for parking, elevator, and ID card holders for access to vital department numbers.

Features and Benefits

Large carrying capacity for multiple keys and badges
Durable strap material UV and Chemical Resistant
Avoid the headache and expense of replacing credentials
Great for car key fobs

SCREW ON FASTENER

Semi-Permananet screw on post fitting cannot open accidentally ensuring you always have access.

INCREASE YOUR CARRYING CAPCITY

More carrying capacity for multiple ID badges, card key fob for parking, elevator, and ID card holders.

DURABLE UV RESISTANT STRAP

Tough, UV and chemical resistand badge strap that will not become brittle and break easily.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Retractable Badge Holder with Large Badge Strap and Secure Fastener

Retractable Badge Reel with Large Badge Strap and Secure Fastener

0067-006-H

$ 10.99

Our Whole Work Lives Are on That Loop!

Product Description

KEEP YOUR ID BADGE & ACCESS CARD SECURE AT ALL TIMES

Tired of cheap plastic ID badge straps and badge holders that break only after a few uses? Yes, we know the problem and frustration and we've decided to do something about it.

Time after time we've heard our nurses, doctors, and other professionals cry out for help to protect what matters most.

That's why we created the ID badge holder that is big enough to carry your badges, card key fob for parking, elevator, and ID card holders for access to vital department numbers.