SUPER48 Heavy Duty Retractable Keychain with Ball-Joint Lock
SUPER48 Heavy Duty Retractable Keychain with Ball-Joint Lock
SUPER48 Heavy Duty Retractable Keychain with Ball-Joint Lock
SUPER48 Heavy Duty Retractable Keychain with Ball-Joint Lock
SUPER48 Heavy Duty Retractable Keychain with Ball-Joint Lock
SUPER48 Heavy Duty Retractable Keychain with Ball-Joint Lock
SUPER48 Heavy Duty Retractable Keychain with Ball-Joint Lock
SUPER48 Heavy Duty Retractable Keychain with Belt Clip or Duty Belt Leather Loop and Ball-Joint Key Ring Lock

SUPER48 Heavy Duty Retractable Keychain with Ball-Joint Lock

0S48-803

Regular price $ 17.49 Save $ -17.49
-3943 in stock

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Product Description

The SUPER48 Heavy Duty Retractable Keychain was built for rugged use and hard work. The durable black polycarbonate case is impact resistant, and the retractable cord made with DuPont Kevlar® fiber is guaranteed to outlast any other retractable key holders on the market. Attach your keys or small tools to the oversized split ring and secure the clip to your belt. When you need your keys just pull them out, when your done let them go and the built-in tether retracts back into place, secure the ball-joint lock until you need them again. When you need a heavy duty key holder to secure a large number of keys, the SUPER48 Heavy Duty Retractable Keychain your best choice.

Features and Benefits

  • Lasts up to 10x longer and protected by a 1-Year warranty 
  • Made in the USA with globally sourced materials.  
  • KEY-BAK ECO-REELS produce 90% less waste than disposable reels, keychains, and tethers 
  • Heavy Duty aramid fiber cord with an 80 lb. minimum breaking strength
  • 2-1/4" diameter black, lightweight, shatter resistant polycarbonate case
  • Patented ball-joint lock prevents snagging and allows for overloading
  • Belt clip options fits belts up to 1.8" and locks with the included pin
  • Leather Loop options fit up to 2.25" duty belts common in law enforcement
  • Oversized 1.5" black split-ring
  • Heavy Duty retraction force holds up to 8 oz. and has a 48" reach
  • Standard Duty retraction force holds up to 13 oz. and has a 36" reach
  • Xtreme Duty retraction force holds up to 20 oz. and has a 28" reach
  • Backed by a Lifetime Service Policy 

PATENTED BALL-JOINT LOCK

The patented ball-joint lock on the SUPER48 Retractable Heavy Duty Key Holder keeps your keys securely at your side while not in use. Like our other models, the SUPER48 will only retract the amount of weight specified on the retraction force, but the ball-joint will allow you to exceed the retraction force and lock your keys when you're not using them so they don't sag.

KEY-BAK Retractable Reels - Super48 Kevlar Cord

HEAVY DUTY ARAMID FIBER CORD

The SUPER48 features a retractable cord, made with DuPont Kevlar® fiber. The SUPER48 comes in 3 different retraction forces, a 48" Kevlar Cord with 8 oz. retraction, a 36" Kevlar Cord with 13 oz. retraction and the 28" Kevlar Cord with 20 oz. of retraction.

KEY-BAK Retractable Reels - Super48 Steel Belt Clip

BELT CLIP OR LEATHER LOOP

There are two attachments available with the SUPER48. There is a steel belt clip option that fits belts up to 1.8" and locks into a belt loop with the an included pin. There is also our leather duty belt loop option that fits belts up to 2.25" duty belts most common in law enforcement.

HAND SANITIZER CARRIER

Upgrade your SUPER48 to include the Hand Sanitizer Carrier. Paired with KEY-BAK retractable keychains, the Hand Sanitizer Carrier keeps hand sanitizer secure & accessible at all times and can fit nearly any shaped bottle up to 2 oz.

Alternative uses for hand sanitizer carrier

COMMON QUESTIONS

How long does thE SUPER48 KEY HOLDER reach?

The SUPER48 comes in 3 different retraction forces, a 48" Kevlar Cord with 8 oz. retraction, a 36" Kevlar Cord with 13 oz. retraction and the 28" Kevlar Cord with 20 oz. of retraction.

What is the retractable cord ON THE SUPER48 made out of?

The SUPER48 features a heavy duty retractable cord, made with DuPont Kevlar® fiber and has an 80 lb. minimum breaking strength.

How DO YOU ATTACH KEYS TO THE SUPER48 KEY HOLDER ?

The SUPER48 has a black oversized 1.5" black split-ring

Is the SUPER48 KEY HOLDER made in the USA?

The SUPER48 Heavy Duty Retractable Key Holder is designed and built in the USA with globally sourced materials at our factory in Ontario, CA.

What is the Size of the SUPER48?

The SUPER48 Heavy Duty Key Holder is 2.28" wide and 3.4" from the top of the reel to the top of the split ring, the split ring is 1.25" in diameter. The body of the reel is .7" thick.

WHAT CUSTOMERS ARE SAYING

Customer Reviews

Based on 131 reviews
85%
(112)
8%
(10)
4%
(5)
1%
(1)
2%
(3)
E
Erik McNeel
Hell of a product

This is an amazing product I'm very pleased with it I've had it for going on two weeks now and would highly recommend it to anyone

D
Dave Lundquist
Works Great

I'm a Corrections Officer so I am always using my keys. I just recently bought The KEYBAK Key Retractor. I should have gotten this sooner it really makes it easy mto hang onto my keys. There alweays in the same spot and if i drop them there right where i need them every time. Some of trhe other Ofc.'s are buying them after they saw mine. Great Tool to have. Thank You.

J
Jeri Williams
awesome

I have purchased them previously at an Ace Hardware but they discontinued selling them, so I looked it up and found them online. I was excited that they were still made. Thanks

T
Thomas P

" Very Happy Satisfied Customer "

P
Paul Riley

Too large but very useful and durible

S
Shawn H.
Rugged.

I liked this product, the cable is thin and smooth and it's housing is rugged. I do think the plastic housing is actually loud when my keys rub against it. It would be nicer if you folks coated or dipped the housing in plastic or rubber.

J
Jose Pacheco

SUPER48 Heavy Duty Retractable Keychain with Ball-Joint Lock

S
Stuart Clement]
Tough Piece of Hardware

This is way too much retraction tension for just one key. Almost too short of a pull cord. Probably works best for many heavy keys. If the lock I'm reaching is above the keychain then I prepare for the keychain detaching from my belt and severely hitting the hand that is holding the key!! < THAT HURTS! OWWWW! A heavy object to attach to this will probably work much better than just one key! I should probably request an exchange for a retractagel keychain with MUCH LESS TENSION!! This item is definitely built to last. It makes a loud clicking noise almost every time the key retracts due to the notch for holding the key in place. Kind of annoying in my opinion. It's the ball joint lock doing what it is designed to do but still annoying loud click nearly every time the key retracts. The quality and design are the best for the money.

A
Anonymous
Handy tool!

I use this for my job to hold keys and it does a great job doing what I need it to do. The cord is very strong and long which is perfect!

m
mark hatton

SUPER48 Heavy Duty Retractable Keychain with Ball-Joint Lock



You may also like

CUSTOM LOGO PRINTING

Our top of the line direct digital printing process prints your logo directly to the surface of the key or badge reel and provides a clear, durable image to make your brand stand out.

Customer Reviews

Based on 131 reviews
85%
(112)
8%
(10)
4%
(5)
1%
(1)
2%
(3)
E
Erik McNeel
Hell of a product

This is an amazing product I'm very pleased with it I've had it for going on two weeks now and would highly recommend it to anyone

D
Dave Lundquist
Works Great

I'm a Corrections Officer so I am always using my keys. I just recently bought The KEYBAK Key Retractor. I should have gotten this sooner it really makes it easy mto hang onto my keys. There alweays in the same spot and if i drop them there right where i need them every time. Some of trhe other Ofc.'s are buying them after they saw mine. Great Tool to have. Thank You.

J
Jeri Williams
awesome

I have purchased them previously at an Ace Hardware but they discontinued selling them, so I looked it up and found them online. I was excited that they were still made. Thanks

T
Thomas P

" Very Happy Satisfied Customer "

P
Paul Riley

Too large but very useful and durible

S
Shawn H.
Rugged.

I liked this product, the cable is thin and smooth and it's housing is rugged. I do think the plastic housing is actually loud when my keys rub against it. It would be nicer if you folks coated or dipped the housing in plastic or rubber.

J
Jose Pacheco

SUPER48 Heavy Duty Retractable Keychain with Ball-Joint Lock

S
Stuart Clement]
Tough Piece of Hardware

This is way too much retraction tension for just one key. Almost too short of a pull cord. Probably works best for many heavy keys. If the lock I'm reaching is above the keychain then I prepare for the keychain detaching from my belt and severely hitting the hand that is holding the key!! < THAT HURTS! OWWWW! A heavy object to attach to this will probably work much better than just one key! I should probably request an exchange for a retractagel keychain with MUCH LESS TENSION!! This item is definitely built to last. It makes a loud clicking noise almost every time the key retracts due to the notch for holding the key in place. Kind of annoying in my opinion. It's the ball joint lock doing what it is designed to do but still annoying loud click nearly every time the key retracts. The quality and design are the best for the money.

A
Anonymous
Handy tool!

I use this for my job to hold keys and it does a great job doing what I need it to do. The cord is very strong and long which is perfect!

m
mark hatton

SUPER48 Heavy Duty Retractable Keychain with Ball-Joint Lock